Tilia americana 'McKSentry'
Growing zones
See Zone Map >
3-8
Tilia americana 'McKSentry'
Status: In stock
Product ID#: lamer
Starting at:
$89.99
Starting at:
Product Description
Sun Exposure
Sun
Bloom Time
Summer
Soil Conditions
Normal, Clay/Heavy, Dry
Fall Color
Yellow
Flower Color
White
Fruit Color
Green
Mature Plant Size (H x W)
40-60' x 25-30'
American Sentry® Linden was trademarked in 2004 and selected by Howard Kulke at McKay Nursery. Its narrow, upright, pyramidal habit opens up slightly as it ages. The branches come off the main stem at 45-degree angles and are well balanced throughout the crown. It has a spicy fragrance with creamy white flowers in late June. The bark is smooth and distinctively gray when young. The heart-shaped, green leaves are toothed and have a whitish color on the underside that turns yellow in the fall.
- Sun
Mature Plant Size (H x W):
40-60' x 25-30' 
Bloom Season:
Summer
Key features
- Drought Tolerant
- Native
- Walnut Toxicity Resistant
- Attracts Pollinators
Planting Care
Planting & Care for Trees – Lindens
Preparation
- If you have a large landscape with plenty of room for a medium-to-large tree to spread its branches, consider growing a linden tree. These handsome trees have a loose canopy that produces dappled shade on the ground below.
- Linden trees are attractive trees that are ideal for urban landscapes because they tolerate a wide range of adverse conditions, including pollution.
- The best time for planting a linden tree is in fall after the leaves drop, although you can plant container-grown trees any time of year.
- Choose a location with full sun or partial shade and moist, well-drained soil.
- The tree prefers a neutral to alkaline pH but tolerates slightly acidic soils as well.
- Mulch around the linden tree with organic mulch such as pine needles, bark or shredded leaves. Mulch suppresses weeds, helps the soil hold moisture and moderates temperature extremes.
Opening Plant Material
- Bare Root - Cut open the bundle (top and roots are tied) and separate all the plants. Soak roots in buckets of water until planted. Each plant type will be labeled separately for identification. Do not expose the roots to sun. They should never dry out. Keep roots covered. All bare-root plants must be trimmed when planted.
- B&B - Soak root ball very well.
- Containers - Completely saturate all container plants by putting in a larger container of water until stops bubbling, remove. Now you’re ready to plant.
- Each type of plant has an illustration on how to plant if you scroll down and click on the orange rectangular box “Handling & Plant Guidelines”.
Planting Bare Root
- Plant Bare root in spring. A good indicator if you can still plant is if the ground is still workable you’re good to go. If a hard frost is expected be sure to hold off on planting.
- Dig a hole at least 6" wider and the same depth as the root mass. The crown or graft of the plant should be slightly higher than ground level where it was grown at the nursery.
- Trim off the broken roots and branches.
- Place fertilizer packets in hole (if purchased). Do not place other fertilizers in the planting hole. *Use Our Recommended Fertilizer.
- Spread the roots and fill halfway with soil, then water until soil settles completely saturating the soil and planting pit.
- Re-adjust plant and fill the hole with the rest of the soil.
- Back fill the balance of the soil and water well.
- See our link below “Handling & Planting Guidelines” for illustrations on planting.
Planting B&B trees
- Plant B&B trees in spring or fall. A good indicator if you can still plant is if the ground is still workable you’re good to go. If a hard frost is expected be sure to hold off on planting.
- Dig a hole at least 6" wider and no deeper than the size of the ball on the plant. Rotate the plant to the proper position. Never lift or move trees by the tops.
- Notice where the base of the trunk flairs out from the tree. This is called the root flair. This root flair should show when the tree is planted. If necessary, add soil under the ball so the root flair is exposed.
- Place fertilizer packets into the bottom of the hole (if purchased). *Use Our Recommended Fertilizer
- Backfill ½ of the hole with soil and completely saturate the soil with water.
- Once the tree is straight and located as desired, cut and remove twine. Then, remove or bend back top ? of metal basket. Lastly, remove exposed burlap from top of ball
- Fill the hole to the top of the ball with soil, then soak well with water and let settle.
- The top of the root ball should be visible and slightly higher than the soil around it.
- Add mulch on top of soil making sure to not put mulch against the trunk or stems.
- See our link below “Handling & Planting Guidelines” for illustrations on planting.
Planting containers
- Slide plant from pot by tapping on the bottom of the pot.
- Dig a hole no deeper than the depth of the container and 6" or more, making sure it’s wider on the sides
- With shovel or knife trim bottom 2" off of the root ball for plants in plastic containers.
- Rotate the plant to the proper position. Never lift or move plants by the tops.
- Place the root ball in the hole.
- Notice where the base of the trunk flairs out from the tree. This is called the root flair. This root flair should show when the tree is planted. If necessary, add soil under the ball so the root flair is exposed.
- Place fertilizer packets into the bottom of the hole (if purchased). *Use Our Recommended Fertilizer.
- Backfill the hole with soil, making sure the top of the root ball is visible and slightly higher than the soil around it.
- Firm the soil around the plant. Water well to settle soil around the root ball.
Pruning - After Planting
- Bare Root - Prune ALL bare root plants to reduce transplant shock and ensure success. Pruning should occur either before or as soon after planting as possible. All pruning should be done with a sharp pruning shears.
- B&B & containers - Although it is not essential for B&B or containers to be pruned after planting, a light pruning for shape, to remove any broken branches from shipping, or to thin out a heavily branched plant will help in the transplanting process and in the appearance of your new planting.
Pruning - Through-out the Season
- Pruning young linden trees in the first three to four years after planting stimulates new growth.
- New growth that becomes too thick or grows toward the center of the crown should be pruned from early to mid-summer to prevent overgrowth that blocks other branches. Remove any dead or damaged branches during the summer pruning session.
Watering - After Planting
- Plants typically take approximately 6 weeks to establish new roots in your soil. During this period, water plants as often as every 2-4 days at the start and at least a minimum of once per week.
- Beyond the 6 week establishment period, water once per week, unless rains occur.
- Stick your finger into the soil around 3” to check soil moisture.
Watering - Through-out the Season
- After the first season, plants should only be watered during extended periods without rain.
- How do you know if your plants need water? The easiest way to tell is to touch the soil around the roots. If it is moist, there is no need to water. If it is dry, give it a good soaking with the hose end (no nozzle) watering the soil only, not the leaves.
- Stick your finger into the soil around 3” to check soil moisture.
Planting & Handling Help
Download our Planting and Handling Guide below to plan for a successful arrival and install of your plants. Be sure to water all plants as soon as they arrive and every day until you’re ready to plant. Keep any bare root bundles in a shady, cool spot with the roots covered at all times.
Learn More
Watch our videos on handling bare root plants, how your order is prepared for shipment and more.
Plant Sizing
What is the difference between Containers, Grow Bags, Bare Root, and Balled & Burlap (B&B)?
Shipping Times
Our FedEx and local shipping times depend on two factors, one is by the region and the second is the type of product being shipped. For example, small fruits are only shipped in spring, but majority of our perennials are shipped from spring until fall. Keep in mind the dates below act as a general guide. Due to unpredictable weather, staffing, inventory and industry demands these timelines can change. Therefore, we cannot guarantee any of these times.
Shipping Dates by Region*
Northern Cold Region: April 22nd - November 7th
Northern Region: April 15th - November 7th
Middle Region: April 1st - November 7th
Southern Region: March 15th - November 7th
Local Delivery (small radius from Waterloo, WI): April 22nd - November 7th
Shipping Dates by Season*
Spring Shipping: Region Start Date (above) - May
Fall Shipping: September - November
Due to unpredictable weather, these times may vary. Some varieties are exceptions due to heat and plant health reasons. Enter your shipping zip code at the top of this page and be sure to check the shipping information on each product before you add it to your cart. If the product is too large or restricted in your state, you will not be able to checkout with that item in your cart.